Version 1.04 - Jan 28, 2017

1) Added M1 Stop button. Button LED indicates whether Optional M1 Stop is active. 
Adjacent LED indicates when UCCNC is stopped for an M1.

2) Vars used for Auto Zero Initialize were also used by the Auto Leveler plugin.
Vars are no longer being used in the screenset, to try to avoid future conflicts.
An LED adjacent to the Auto Zero Initialize button will indicate when the Auto Zero Initialize macro has run.
This LED must be active for the M6 macro to run.
The fixed plate location is now stored in a read-only DRO adjacent to the above mentioned LED.

3) An LED was added above the RESET button to indicate when Jog Safe Probe Mode is active, so you don't have to open the jog screen to check it's status.


Version 1.05 - Feb 11, 2017

1) Added Auxiliary Encoder Screen (Ethernet Controllers Only).

2) Added Spindle PID Control button (Ethernet Controllers Only).


Version 1.06 - March 17, 2017

1) Fixed Incorrect Limit LED's on Diagnostics page for UC100.

2) Added Arc Tolerance Setting for UCCNC V1.2035.


Version 1.07 - May 15, 2017

1) Fixed Incorrect Limit LED's on Diagnostics page for UC300 and UC300ETH.

2) Changed "Apply Settings" and "Save Settings" buttons to toggle buttons, to match the behavior of the default screenset.


Version 1.08 - May 30, 2017

1) Fixed Incorrect Auxiliary Encoder Count Fields


Version 1.09 - June 11, 2017

1) Added support for UC300ETH with M45 motherboard.


Version 1.010 - August 20, 2017

1) Added support for UC300ETH with UB1 Breakout/Motherboard from CNC Room.

2) Fixed bug in X-Y- Prbing macro (M20534) which gave incorrect zero location.


Version 1.011 - August 20, 2017

1) Added some things to better support UCCNC version 1.2047

2) Fixed some issues with XY Probing.